Ir para o conteúdo principal

Alterações no passo #3

Edição por Walter Galan

Edição aprovada por Walter Galan

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Use the flat end of a spudger to loosen the adhesive underneath the touchscreen ribbon cable.
-[* black] Pull the touchscreen ribbon cable straight out of its sockets on the logic board.
+[* black] Use the flat end of a spudger to loosen the adhesive underneath the digitizer ribbon cable.
+[* black] Pull the digitizer ribbon cable straight out of its sockets on the logic board.