Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #4

Edição por Miroslav Djuric

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Lift the black plastic faceplate out of the optical bay enclosure.
[* icon_note] You will no longer need the faceplate or the two Phillips screws that held it in place. Set those parts aside if you ever wish to put the faceplate back into the enclosure.
[*
black] Reassemble the optical bay enclosure without the faceplatefaceplate, reusing the original three 3.0 mm Phillips screws to keep it intact.
[* black] The enclosure should now look like the third picture in this step
.
[* icon_note] You will no longer need the faceplate or the two Phillips screws that held it in place. Set those parts aside if you ever wish to put the faceplate back into the enclosure.
[*
black] Reassemble the optical bay enclosure without the faceplatefaceplate, reusing the original three 3.0 mm Phillips screws to keep it intact.
[* black] The enclosure should now look like the third picture in this step
.