Conserte seus objetos Comunidade Loja

Alterações no passo nº 2

Edição por Adrian Borrego —

Edição aprovada por Adrian Borrego

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Grab the back, lift and open like a book to expose the motherboard.
-[* red] Use a plastic spudger tool on the ribbon connected from the heart rate monitor to the motherboard.
-[* orange] Insert and lift the plastic connector to release the ribbon.
+[* red] Grab the back, lift and open like a book to expose the motherboard. Locate the ribbon connector on the left.
+[* orange] Use a plastic spudger tool on the ribbon connected from the heart rate monitor to the motherboard.
+[* black] Insert and lift the plastic connector to release the ribbon.
[* icon_caution] Only a small force when lifting the plastic connector is needed to avoid damage.