Alterações no passo nº 4
Linhas do passo
| [* black] Lay the bottom part of the device upside down on a table. | |
| [* red] Locate the four PH1 screw heads on the underside. | |
| [* black] We used the bit driver with a 4mm driver(from IFIXIT pro tech toolkit) attachment to elongate the driver. Then, attached the PH1 driver head to the 4mm driver. (See note below and second image) | |
| - | [* icon_note] ***NOTE***: The PH1 screw heads are located 5cm into the device. Make sure to use a PH1 Driver that is 1cm in diameter and 5cm in depth. |
| + | [* icon_note] ***NOTE***: The PH1 screw heads are located 5cm into the device. Make sure to use a PH1 Driver that is at most 1cm in diameter and at least 5cm in depth. |