Ir para o conteúdo principal

Alterações no passo nº 2

Edição por Adam Jansen

Edição aprovada por Adam Jansen

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Locate the Loudspeaker at the bottom of the device. Remove the four black screws(highlighted in yellow) using the T5 Torx Screwdriver. Then use the Phillips #000 Bit to remove the three silver screws (highlighted in red).
+[* black] Locate the Loudspeaker at the bottom of the device. Remove the four black screws(highlighted in yellow) using the [product|IF145-039-2]. Then use the [product|IF145-030-3] to remove the three silver screws (highlighted in red).