Pular para o conteúdo principal

Alterações neste passo

Edição por Jake Devincenzi

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Set the new hard drive into the open area where the plastic positioner was.
[* icon_note
red] Make sure that the connectors on the hard drive connectors are facing down, as shown, otherwise you will not be able to installdown before placing it into the driveenclosure.
[* black] Gently place the hard drive into the enclosure's hard drive slot
.
[* black] While firmly holding the enclosure in place with one hand, use your other hard to press the hard drive overinto the enclosure connectors.
[* black] Once the hard drive is snug, reinsert the plastic positioner, while holding the hard drive against the bottom of the enclosure.
[* black] Set the new hard drive into the open area where the plastic positioner was.
[* icon_note
red] Make sure that the connectors on the hard drive connectors are facing down, as shown, otherwise you will not be able to installdown before placing it into the driveenclosure.
[* black] Gently place the hard drive into the enclosure's hard drive slot
.
[* black] While firmly holding the enclosure in place with one hand, use your other hard to press the hard drive overinto the enclosure connectors.
[* black] Once the hard drive is snug, reinsert the plastic positioner, while holding the hard drive against the bottom of the enclosure.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão

Imagem 3

Versão Antiga

Nova Versão