Skip to main content

Alterações no passo #5

Edição por oldturkey03

Aguardando aprovação

Sem alteração

Linhas de Passo

[* black] Unsolder all the capacitors and remove them. In this repair a 30watt soldering iron and solder sucker was used. The solder sucker can be substituted with soldering wick.
[* black] Solder all the capacitors in their respective places. On the logic board, where the capacitors are located, is an outline of a circle with one part of the circle being heavier. It corresponds with the negative lead of the condenser.
[* black] Once all the capacitors are replaced, double check the board to make sure everything is properly mounted.