Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #3

Edição por Scott Havard

Edição aprovada por Scott Havard

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_note] '''If this is your first time removing an iPhone battery adhesive strip, refer to the video in the following step before beginning.'''
[* icon_caution] Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly.
[* black] Slowly pull one battery adhesive tab away from the battery, toward the bottom of the iPhone.
[* black] Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case. For best results, pull the strip at a 60º angle or less.
[* icon_note] The strip will stretch to many times its original length. Continue pulling and re-grab the strip near the battery if necessary.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado

Imagem 3

Nenhuma imagem anterior

Adicionado