Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #5

Edição por Adam O'Camb

Edição aprovada por Adam O'Camb

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_note] If you successfully removed both adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.
[* black] [guide|25705|Prepare an iOpener|new_window=true] and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.
[* black] After about a minute, remove the iOpener, flip the phone over and use a plastic card to break up any remaining adhesive behind the battery.
[* icon_caution] Be sureAvoid bending the battery. Damage to not bend the battery, as doing so can puncture the cell andbattery may release dangerous chemicalschemicals, and could start a fire.
[* icon_caution] Don'tDo not pry under the topmost sectiontop third of the battery, near the volume up button and mute switch, or you may damage the volume controlsbutton ribbon cable, which is adhered to the rear case just beneath the batterycable.
[* icon_caution] Be sureAvoid bending the battery. Damage to not bend the battery, as doing so can puncture the cell andbattery may release dangerous chemicalschemicals, and could start a fire.
[* icon_caution] Don'tDo not pry under the topmost sectiontop third of the battery, near the volume up button and mute switch, or you may damage the volume controlsbutton ribbon cable, which is adhered to the rear case just beneath the batterycable.