Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #5

Edição por Scott Havard

Edição aprovada por Scott Havard

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_note] If you successfully removed both adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.
[*
black] Insert wisdom here[guide|25705|Prepare an iOpener|new_window=true] and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.
[* black] After about a minute, remove the iOpener, flip the phone over and use a plastic card to break up any remaining adhesive behind the battery.
[* icon_caution] Be sure to not bend the battery, as doing so can puncture the cell and release dangerous chemicals
.
[* icon_note] If you successfully removed both adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case.
[*
black] Insert wisdom here[guide|25705|Prepare an iOpener|new_window=true] and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer.
[* black] After about a minute, remove the iOpener, flip the phone over and use a plastic card to break up any remaining adhesive behind the battery.
[* icon_caution] Be sure to not bend the battery, as doing so can puncture the cell and release dangerous chemicals
.