Skip to main content

Alterações no passo #1

Edição por Walter Galan

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] RemoveUsing the following four screws securingflat end of a spudger, pry the subwoofer and right speaker toconnector straight up off the upper case:logic board.
[* black] RemoveUsing the following four screws securingflat end of a spudger, pry the subwoofer and right speaker toconnector straight up off the upper case:logic board.
[* red] Two 3.2 mm Phillips screws.
[* orange] One 2.6 mm Phillips screw.
[* yellow] One 5 mm Phillips screw.
[* black] Lift the subwoofer and right speaker assembly out of the upper case.