Alterações no passo #17
Edição por Michael Vovaris —
Edição recusada por Sam Goldheart
- Antes
- Depois
- Sem alteração
Linhas de Passo
[* red] Remove two 7 mm Phillips screws securing the DC-in board to the upper case. |
[* icon_note] Note: This step is not completely necessary, but it will make it easier to disconnect the cable that is connected to the DC-in |
[* icon_note] Note: This step is not completely necessary, but it will make it easier to disconnect the cable that is connected to the DC-in |