[* red] Remove two 7 mm Phillips screws securing the DC-in board to the upper case.
[* black] Note, thisicon_note] Note: This step is not completely necessary. Itnecessary, but it will make disconnectingit easier to disconnect the cable that is connected to the DC-in board easier, but if you have difficulty removing the screws don't botherboard.
[* black] Note, thisicon_note] Note: This step is not completely necessary. Itnecessary, but it will make disconnectingit easier to disconnect the cable that is connected to the DC-in board easier, but if you have difficulty removing the screws don't botherboard.