Ir para o conteúdo principal

Alterações no passo #1

Edição por Sam Goldheart

Edição aprovada por Sam Goldheart

Sem alteração

Linhas de Passo

-[* icon_caution] The fan socket and connector can be seen in the second and third pictures. Do not break the plastic fan socket off the logic board when removing it from its socket. The layout of the logic board shown in the second picture may look slightly different than your machine but the fan socket is the same.
[* black] Use a spudger to pry the fan connector straight up and out of its socket on the logic board.
+[* icon_caution] Be sure to only pry up on the connector itself ***not on the socket*** or you may damage the machine.
[* icon_note] It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão

Imagem 3