Ir para o conteúdo principal

Alterações no passo nº 5

Edição por Taylor Crothers

Edição aprovada por Taylor Crothers

Antes
Depois
Sem alteração

Linhas do passo

[title] Cleaning the Barrel
[* black] Connect the 12 gauge wire brush to the ramrod. Slide this all the way to the bottom of the barrel and out two to three times
- [* icon_note] Ramrod: A long, straight metal rod that is paired with a cotton mop or wire brush to clean the inside of a barrel.
[* icon_note] Wire Brush: A metal brush that attaches to the ramrod and is used to clean the inside of the barrel.
[* black] Detach the wire brush from the ramrod and attach the 12 gauge cotton mop.
[* icon_note] Cotton Mop: A cotton wad that attaches to the ramrod used to wipe the inside of the barrel with cleaning oil.
[* black] Spray the cotton mop with the Rem Oil and slide this all the way to the bottom of the barrel and out two to three times.
[* icon_note] Rem Oil: A multi-purpose oil that cleans metal, protects metal, and does not attract dirt to the metal.