Conserte seus objetos Comunidade Loja

Alterações no passo nº 8

Edição por Joris Blok —

Edição aprovada por Joris Blok

Antes
Depois
Sem alteração

Linhas do passo

-[* black] image 1: The plastic covering plate is connected by snapfits to the product. A hinch is placed between both, this way by aplying some pressure the part can be pulled back. This is the first step in removing the plate.
-[* black] image 2: The snapfits work in 2 different directions. To completely remove the covering plate the plastic housing has to be pulled back. No tools are needed.
-[* black] image 3: The plastic baseplate can be removed by unscrewing the screw with a philps screwdriver.
+[* black] Image 1: The plastic covering plate is connected by snapfits to the product. A hinch is placed between both, this way by aplying some pressure the part can be pulled back. This is the first step in removing the plate.
+[* black] Image 2: The snapfits work in 2 different directions. To completely remove the covering plate the plastic housing has to be pulled back. No tools are needed.
+[* black] Image 3: The plastic baseplate can be removed by unscrewing the screw with a philps screwdriver.