Ir para o conteúdo principal

Alterações no passo #3

Edição por Ron Davis

Edição aprovada de Ron Davis

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Lift up (towards display)Using a spudger, release the pinstabs on either sidethe keyboard cable ZIF connector.
[* icon_note] Depending on the variation
of this model, the ribbontabs on this ZIF connector and then detach ribbon
[* black] In a different incarnation,
will either flip up towards the ribbon connector may be loosened by slidingdisplay or push out in the latch away from you, one side at a time, not lifting
[* icon_caution] Be very careful if using metal tools, you are working close to surface-mounted board components
direction of the display.
[* red] Lift up (towards display)Using a spudger, release the pinstabs on either sidethe keyboard cable ZIF connector.
[* icon_note] Depending on the variation
of this model, the ribbontabs on this ZIF connector and then detach ribbon
[* black] In a different incarnation,
will either flip up towards the ribbon connector may be loosened by slidingdisplay or push out in the latch away from you, one side at a time, not lifting
[* icon_caution] Be very careful if using metal tools, you are working close to surface-mounted board components
direction of the display.