Alterações no passo nº 2
Edição por billyroypage —
Edição aprovada por billyroypage
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] Installation |
|---|---|
| + | [* black] Installing the hinges (now remove the old ones from the old Door) use them- |
| + | [* black] as a pattern for the new door this is the critical step and using the old hinges as patterns is smart . Lay the old top hinge on the edge of the new door with the paint line as the guide ( measure the distance down from the top of the old door .) then trace the hinge. |
| + | [* black] Match the depth of the original cut out on the old door . Basically you want the hinge flush with the door .Cut out the new hinge carefully with a nice sharp chisel 1-incher is good must be sharp. Repeat for the bottom hinge . You can buy new hinges or clean up the old ones and reuse them if there ok and screws aren't stripped. |