Alterações no passo nº 9
Edição por Nate Tippery —
Edição aprovada por Nate Tippery
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Pry antenna cable connector straight up from the board using |
|---|---|
| + | [* black] Pry the antenna cable connector straight up from the board using the flat edge of a spudger. |
| [* black] Repeat the previous step for the second antenna cable. | |
| - | [* icon_reminder] To reinstall, hold the connectors in place and gently press them straight down. The connectors “snap” into their sockets much like the metal snaps on a jacket. |