Alterações no passo nº 8
Edição por Nate Tippery —
Edição aprovada por Nate Tippery
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Pull the cable straight out from the connector to disconnect it. | |
| [* icon_reminder] To reinstall the cable, hold it near the end and push it straight into the connector, being careful not to kink the cable. | |
| - | [* black] Push |
| + | [* black] Push each side of the sliding connector using the tip of a spudger carefully. |
| [* black] Repeat previous step for bottom part of the sliding connector. |