Alterações no passo nº 12
Edição por Nate Tippery —
Edição aprovada por Nate Tippery
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Flip the motherboard over and locate the fan. | |
| - | [* black] Unscrew the two screws connecting the fan to the motherboard and pull up on the 3 colored wires until they are detached. |
| + | [* black] Unscrew the two Phillips head 4.3 mm screws connecting the fan to the motherboard and pull up on the 3 colored wires until they are detached. |
| [* black] Lift the fan up and slide it out from the motherboard. Now you are ready to put in your new fan. |