Alterações no passo nº 12
Edição por Chris Neate —
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] You pulled that wire off the copper plate, didn't you? I sure did. Twice. If you have a soldering iron it's easy to strip the wire back, reheat the solder, and attach the wire to it. Even with no experience it's an easy job. |
|---|---|
| + | [* black] If you don't have a soldering iron this might be a problem. It's not entirely necessary for the flash to work (I put it back together and fired off a couple shots without it) but I wouldn't recommend it. Nikon calls it the insulating plate but I'm not sure what it's for. |
Imagem 1
Nenhuma imagem anterior
Adicionado