Conserte seus objetos Comunidade Loja

Alterações no passo nº 1

Edição por Dominik Schnabelrauch —

Edição aprovada por Dominik Schnabelrauch

Antes
Depois
Sem alteração

Linhas do passo

[title] Gear adjustment
-[* black] After assembling your bike you may realize, the gear system isn't working perfectly and you need to make some adjustments on your own.
-[* black] One common problem is the displacement of the two sprockets in the rear end as you can see in the picture, causing the chain to run aslope instead of straight.
-[* black] To fix this, use the two screw nuts of the rear derailleur seen in the picture. To reach them it makes sense to flip your bike upside down. The left one is to move the big sprocket, the right one for the small sprocket. Use an allen key until both are in one line.
+[* black] One common problem is the displacement of the two sprockets in the rear end as you can see in the picture, causing the chain to run aslope instead of straight. To fix this, use the two screw nuts of the rear derailleur.
+[* black] Flip your bike upside down for a better workflow.
+[* black] The left screw nut is to move the big sprocket, the right one for the small sprocket. Use an allen key until both are aligned.