Skip to main content

Alterações no passo #1

Edição por John Chinnery

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Using the flat end of a spudger, pry the subwoofer connector straight up off the logic board. Be careful, the connector will break away from the circuit board. Hold the female part of the connector in place while prizing the male part up from the lead (left)side
[* black] Using the flat end of a spudger, pry the subwoofer connector straight up off the logic board. Be careful, the connector will break away from the circuit board. Hold the female part of the connector in place while prizing the male part up from the lead (left)side