Ir para o conteúdo principal

Alterações no passo #5

Edição por Michal

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Step 5 is about removing the cover which protects the processor from any outside damage
[* black] The cover is attached to four pins. In order to remove the cover, it has to be pulled towards the left.
-[* black] CAUTION: There may be a plastic (rubber) pin (see Image 2), which was put in place for guarantee purposes, therefore before sliding the panel, you should locate and remove this pin
+[* black] ++CAUTION++: There may be a plastic (rubber) pin (see Image 2), which was put in place for guarantee purposes, therefore before sliding the panel, you should locate and remove this pin
[* black] It can also be pushed from the inside (by lifting the bottom of the cover first) (see image 3)