Ir para o conteúdo principal

Alterações no passo nº 17

Edição por Jamie Carrington

Edição aprovada por Evan Noronha

Antes
Depois
Sem alteração

Linhas do passo

-[* black] We loosen a pair of Phillips screws to access the Lighting connector, pop its press connector off the back of the logic board, and seconds later it's free to leave this plastic mess behind.
+[* black] We loosen a pair of Phillips screws to access the Lightning connector, pop its press connector off the back of the logic board, and seconds later it's free to leave this plastic mess behind.
[* black] Luckily, the Lightning port is modular—so if you wear your port out, all you have to do is utterly destroy the case to replace that component.
[* icon_note] The logic board is secured with a lot of sticky tape.