Alterações no passo nº 4
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Continue to slide the opening pick to separate the adhesive holding the front camera and sensor cable to the front panel. |
|---|---|
| - | [* icon_note] There are two standoffs holding the cable in place. Make sure to pull the cable straight up to avoid damaging it. |
| + | [* black] Use the pick to lift the camera cable up off of the two plastic posts on the front panel and separate it from the last of the adhesive. |