Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #3

Edição por Adam O'Camb —

Edição aprovada por Adam O'Camb

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Starting beneath the press connector on the cable, slide an opening pick underneath the front camera and sensor cable.
[* black] Slide the pick towards the front facing camera housing, separating the adhesive holding the cable to the front panel. Stop just before the screw posts.
[* black] Starting beneath the press connector on the cable, slide an opening pick underneath the front camera and sensor cable.
[* black] Slide the pick towards the front facing camera housing, separating the adhesive holding the cable to the front panel. Stop just before the screw posts.