Alterações no passo nº 1
Edição por Scott Havard —
Edição aprovada por Scott Havard
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Reheat your iOpener and apply it to the upper edge of the display assembly to soften the adhesive holding the front sensor assembly in place. |
|---|---|
| + | [* black] Reheat your iOpener and apply it to the upper edge of the display assembly to soften the adhesive holding the front camera and sensor assembly in place. |
| [* icon_note] Wait about two minutes before moving on to the next step to adequately soften the adhesive. |