Ir para o conteúdo principal

Alterações no passo #6

Edição por Angela Pitts

Edição aprovada por Angela Pitts

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use a thin tool to pry the the device apart by lodging it between the clock face and back side of the device.
-[* black] We used the 6 inch metal ruler from the Pro Tech Toolkit.
-[* black] ***Note***: a spudger may not be thin enough to fit in the seam of the device.
+[* black] ***Note***: a spudger may not be thin enough to fit in the seam of the device. We used the 6 inch metal ruler from the Pro Tech Toolkit.