Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #5

Edição por Andrew Bookholt

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_note] DisconnectingThe logic board is still connected to the front case by the following twodisplay ribbon cables may be challenging. To prevent strainingcable, located on the cables or connectors, you can only separateheadphone jack side of the two halveslogic board. When lifting the logic board out of the iPodfront case, do so as you would open a book by rotating the board about 1/2 inch during the processdisplay ribbon cable.
[* black] Use a spudger to slideLift the logic board from the click wheel connector side (the cable out of its connectoryou just disconnected) and lay the logic board next to the front case.
[* icon_note] DisconnectingThe logic board is still connected to the front case by the following twodisplay ribbon cables may be challenging. To prevent strainingcable, located on the cables or connectors, you can only separateheadphone jack side of the two halveslogic board. When lifting the logic board out of the iPodfront case, do so as you would open a book by rotating the board about 1/2 inch during the processdisplay ribbon cable.
[* black] Use a spudger to slideLift the logic board from the click wheel connector side (the cable out of its connectoryou just disconnected) and lay the logic board next to the front case.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado