Alterações no passo nº 1
Edição por Kelsea Weber —
Edição aprovada por Kelsea Weber
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] First, find the mating groove running along the side of device. Using ifixit opening tool with a skinny flat surface, pry the two mating surfaces apart with a twisting motion. Once the surfaces have been separated, using your fingers, pull the two surfaces apart evenly around the edge of the device. |
|---|---|
| + | [* black] Find the mating groove running along the side of device. Use an ifixit opening tool to pry the two mating surfaces apart with a twisting motion. |
| + | [* black] Once the surfaces have been separated, using your fingers, pull the two surfaces apart evenly around the edge of the device. |
| + | [* icon_reminder] During reassembly, be sure to press the two pieces together all the way around the perimeter to ensure good connection. |