Alterações no passo nº 1
Edição por Brock Schaffer —
Edição aprovada por Brock Schaffer
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] First, find the mating groove running along the side of device. Using ifixit opening tool with a skinny flat surface, pry the two mating surfaces apart with a twisting motion. |
|---|---|
| + | [* black] First, find the mating groove running along the side of device. Using ifixit opening tool with a skinny flat surface, pry the two mating surfaces apart with a twisting motion. Once the surfaces have been separated, using your fingers, pull the two surfaces apart evenly around the edge of the device. |