Ir para o conteúdo principal

Alterações neste passo

Edição por Natalie W

Edição aprovada por Natalie W

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] After removing the back side, you should see 2 black rubber pads on the right side. Underneath it is two cables. Using a blue plastic opening tool, you'll want to unclip both of them .
-[* black] You'll notice there are 17 screws around the phone. Use the T3 bit screw driver to remove all of the screws.
-[* black] Now the front screen and motherboard will pop off from that back panel.
+[* black] Using a blue plastic opening tool, unclip the two black rubber pads on the right side.