Ir para o conteúdo principal

Alterações neste passo

Edição por Chisi Amanda Xiong

Edição aprovada por Chisi Amanda Xiong

Sem alteração

Linhas de Passo

+[* black] Look at the top of your phone. You should see the SIM card. Now pop out the SIM card on the top of phone with a SIM card injector tool.
+[* black] Now hold your phone in your hand and use your dominant hand to carefully pry off the back of your phone, using the Flat end of the Spudger tool.
+[* black] After removing the back side, you should see 2 black rubber pads on the right side. Underneath it is two cables. Using a blue plastic opening tool, you'll want to unclip both of them .
+[* black] You'll notice there are 17 screws around the phone. Use the T4 bit screw driver to remove all of the screws.