Ir para o conteúdo principal

Alterações neste passo

Edição por Abigail Travis

Edição aprovada por Abigail Travis

Antes
Depois
Sem alteração

Linhas de Passo

[* black] [guide|25705|Heat up the iOpener] first. Lay it over the device and allow it some time to soften the adhesive holding your back case on.
-[* black] Use your plastic prying tool to slowly and carefully pry the back case off the device.
+[* black] Use your metal spudger to slowly and carefully pry the back case off the device.
[* icon_note] If your case isn't prying off very easily, put it back under the iOpener to soften the adhesive some more, but don't be afraid to use a little force.