Ir para o conteúdo principal

Alterações no passo #4

Edição por bill

Edição recusada por Andrew Optimus Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Use the edge of a plastic opening tool to pry the cellular antenna cable up from its socket on the logic board.
+[* black] Use the edge of a plastic opening tool to pry the cellular antenna cable up from its socket on the logic board. Be careful when doing this to make sure you pry on the metal end and not the cable. Prying on the cable could cause the cable to remove itself from the metal connector.
[* black] De-route the cellular antenna cable out from under the metal fingers attached to the logic board.