Ir para o conteúdo principal

Alterações no passo #8

Edição por Wallace Karraker

Edição recusada por David Hodson

Sem alteração

Linhas de Passo

[* black] Carefully lift the logic board from the end closest to the speaker enclosure and slide it away from the top edge of the iPhone.
[* black] Remove the logic board.
[* icon_caution] Before reassembly, be sure to clean all metal-to-metal contact points on the logic board (***not*** the mating halves of connectors) with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause grounding issues.
+[* black] There is a small rubber edge protector that protects the video and digitizer cables. It is held on by friction, confirm it is in place during reassembly.

Imagem 2

Nenhuma imagem anterior