Ir para o conteúdo principal

Alterações no passo #8

Edição por Christiaan Bye

Aguardando aprovação

Sem alteração

Linhas de Passo

[* black] Carefully lift the logic board from the end closest to the speaker enclosure and slide it away from the top edge of the iPhone.
[* black] Remove the logic board.
+[* icon_note] Apon reassembly, be aware not to trap the tiny power button connector under the logic board (as shown in the second image).
[* icon_caution] Before reassembly, be sure to clean all metal-to-metal contact points on the logic board (***not*** the mating halves of connectors) with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause grounding issues.

Imagem 2

Nenhuma imagem anterior