Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #6

Edição por Ryan Lutz —

Edição aprovada por Ryan Lutz

Antes
Depois
Sem alteração

Linhas de Passo

[* black] If present, peel the piece of black tape covering the hidden screw near the power button.
[* red] Remove the 2.6 mm Phillips screw securing the logic board near the power button.
[* blackicon_caution] (Use caution when removing this screw and removing the power contact held by it; the contact tab will come loose with the screw)
[* blackicon_caution] (Use caution when removing this screw and removing the power contact held by it; the contact tab will come loose with the screw)
[* icon_note] Notice the small rubber bumper under the screen & digitizer cables (which are detached at top above the Q-code). This bumper can fall off of the logic board when removed or get stuck to the cables and fall off later.