Alterações no passo nº 6
Linhas do passo
| [title] Back of the casing | |
| [* red] You must push in these buttons (7 in total) | |
| [* icon_note] It is nearly impossible to not mess up the plastic using a screwdriver, i would recommend using an x-acto knife | |
| [* icon_note] This was one of the harder steps, you must push the button in until it clicks and then go farther still | |
| - | [* black] Make sure you keep pressure applied outwards so that the locks do not |
| + | [* black] Make sure you keep pressure applied outwards so that the locks do not re-engage |