Alterações no passo nº 3
Edição por Nicolas Moreau —
Edição aprovada por Nicolas Moreau
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Using a metal spudger, push the tool through the hole the previous black screw was in to push the pin out of the other side of the hinge. |
|---|---|
| - | [* black] When the pin is removed the two sides of the device can now separate. Be sure to collect the spring that is next to the hinge when they are separated. |
| + | [* black] Using the metal spudger, push through the hole the screw was removed from. Doing this will push the copper pin out of the other side. |
| + | [* black] When the pin is removed the two sides of the device can now separate. |
| + | [* icon_note] Be sure to collect the spring that is next to the hinge when they are separated. |