Alterações no passo nº 3
Edição por Tyler Starr —
Edição aprovada por Tyler Starr
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Remove the remaining larger ribbons, which are secured by zif connectors. There are three large ribbons connected to the top and left side of the logic board. To remove these ribbons, use the plastic opening tool to push up on the tap, which will loosen the ribbon. Pull the ribbons away from their respective connections. |
|---|---|
| + | [* black] Lift the retaining tab and remove the large ribbon cable on the left side of the logic board. |
| + | [* black] Lift the retaining tab and remove the large ribbon cable on the top of the logic board behind the infrared receiver. |
| + | [* black] Lift the retaining tab and remove the large ribbon cable on the top of the logic board just above the joysitck housing. |