Alterações no passo nº 2
Edição por Ahmed Gouda —
Edição aprovada por Ahmed Gouda
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Pull the slot on the top of the SD card reader from the 3DS to loosen the top edge of it |
|---|---|
| + | [* icon_caution] There is a ribbon cable on the bottom of the SD card reader connected to the motherboard. Don't completely pull out the SD card reader at this point |
| + | [* black] Use the flat end of a spudger to pry the SD card ribbon cable off the socket on the motherboard. |
| + | [* black] Lift the SD card reader out off of the lower casing. |