Alterações no passo nº 2
Edição por Matt Steensma —
Edição aprovada por Matt Steensma
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Lift the top edge of the lower case slightly off on the 3DS. | |
| - | [* icon_caution] There are two ribbon cables across the top of the device and one in the bottom |
| + | [* icon_caution] There are two ribbon cables across the top of the device and one in the bottom. Don't pull the lower casing completely off, you may break those connections. |
| [* black] Pry the ribbon cable socket under the right trigger using a plastic opening tool. | |
| [* black] Pry the ribbon cable socket under the infrared recover using a plastic opening tool. | |
| - | [* black] Open the device slowly from |
| + | [* black] Open the device slowly from its top edge. Be careful not to tug the ribbon cable connected near the bottom edge of the device. |
| [* black] Pry the last ribbon cable attached to the lower case using a plastic opening tool. |