Alterações no passo nº 3
Edição por Alec Marnoch —
Edição aprovada por Alec Marnoch
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] Remove the 8 visible Phillips 8.25 mm screws using the |
|---|---|
| - | [* orange] Remove 2 hidden Phillips 8.25 mm screws located underneath the rubber grips at the back (opposite the hinges) with |
| + | [* red] Remove the 8 visible Phillips 8.25 mm screws using the Phillips #0 screwdriver. |
| + | [* orange] Remove 2 hidden Phillips 8.25 mm screws located underneath the rubber grips at the back (opposite the hinges) with the Phillips #0 screwdriver. |
| [* icon_note] The rubber grips are glued in place, so you'll need to peel them up with a superego or other pry tool. | |
| [* black] Remove the back panel by pulling up on each of the 4 corners. | |
| [* icon_note] You may need to use a superego tool to pry the back panel off if it feels tight. |