Ir para o conteúdo principal

Alterações no passo #4

Edição por Paul Bloore

Edição recusada por Andrew Optimus Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Use the edge of a plastic opening tool to pry the cellular antenna cable up from its socket on the logic board. Note that this image (and the others too) show an incorrect routing of the antenna cable. It runs down from the socket and then to the right and under the metal retaining clip - not to the left of it as shown.
[* black] Use the edge of a plastic opening tool to pry the cellular antenna cable up from its socket on the logic board. Note that this image (and the others too) show an incorrect routing of the antenna cable. It runs down from the socket and then to the right and under the metal retaining clip - not to the left of it as shown.
[* black] De-route the cellular antenna cable out from under the metal fingers attached to the logic board.