Conserte seus objetos Comunidade Loja

Alterações no passo nº 2

Edição por Derek Rodriguez —

Edição aprovada por Derek Rodriguez

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Once you remove the panel showed in the last step, it will bring you to what's shown in picture 1, gently press down on the aluminum device and push up, this will make it so you can remove the object.
-[* black] Next remove the 2 objects that are located to top right of the compartment, by pushing down on them too and then pushing on the hooks that are located on the side keeping them in.
-[* black] After you have removed all the objects, unscrew all screws located in this compartment using a Phillips head screwdriver, these will allow you to have access to removing the front of the laptop.
+[* black] Gently press down on the aluminum device and push up to remove the object.
+[* black] Next remove the two objects that are located to top right of the compartment by pushing down on them, and pushing on the hooks that are located on the side.
+[* black] After you have removed all the objects, unscrew all Phillips screws located in this compartment using a Phillips head screwdriver.