Alterações no passo nº 1
Edição por Tyler Starr —
Edição aprovada por Tyler Starr
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Unscrew the two Phillips #0 screws |
|---|---|
| - | [* icon_caution] The screws on the back panel strip easily. So go slow and press down |
| + | [* black] Unscrew the two 3mm Phillips #0 head screws along the top edge of the device. |
| + | [* icon_caution] The screws on the back panel strip easily. So go slow and press down firmly. |
| [* icon_note] The screws on the back panel are held in by locking washers, and won't come out of the back panel. |