Alterações no passo nº 1
Edição por Tyler Starr —
Edição aprovada por Tyler Starr
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Flip the device over so the so the back faceplate is facing up. |
|---|---|
| - | [* black] Remove the 2 Phillips #0 screws from the top of the faceplate. |
| + | [* black] Unscrew the two Phillips #0 screws from the bottom top edge of the device. |
| + | [* icon_caution] The screws on the back panel strip easily. So go slow and press down fairly hard. |
| + | [* icon_note] The screws on the back panel are held in by locking washers, and won't come out of the back panel. |